Table of Contents
Advertisement
Hydraulic Oil
A. Hydraulic Oil Level Check
1. Be sure all cylinders are fully retracted and machine is level.
2. Perform "Shut-Down Procedure" on page 4-4.
3. Check level of hydraulic oil at the sight gauge (6) on the hydraulic tank (5). The
oil level should be visible in the gauge window.
4. If hydraulic oil is low, open the tank cover and remove oil fill cap (7) from filler
neck. Add hydraulic fluid to bring oil up to the upper mark on the sight gauge.
5. Replace hydraulic oil fill cap.
6. Close and secure the tank cover.
31200172
Section 7 - Lubrication and Maintenance
10
7
5
6
7-13
Advertisement
Table of Contents
