Table of Contents
Advertisement
Section 3 - Configuration
Smart Connect
Enable or disable the Smart Connect Feature. When enabled,
only a few configuration options are available to simplify
configuration.
Extended Wi-Fi - Smart Connect Enabled
Status
Enable or disable the Extended Wi-Fi wireless network.
Wi-Fi Name (SSID)
This is the name of the DRA-2060's extended network. If
using Wi-Fi, the DRA-2060 will rebroadcast the uplink router's
Internet connection under this SSID. You may also manually
set the SSID of the extended network.
Password
Enter the password or network key that you wish to use for
the extended Wi-Fi network.
Schedule
Use the drop-down menu to select the time schedule that
the rule will be enabled for. The schedule may be set to
Always Enable or you can create your own schedules in the
Schedules section. Refer to "Schedule" on page 36 for more
information.
Wireless - Smart Connect Disabled
Status
Enable or disable the 2.4 GHz network by toggling this slider.
Wi-Fi Name (SSID)
This is the name of the DRA-2060's extended network. If
using Wi-Fi, the DRA-2060 will rebroadcast the uplink router's
Internet connection under this SSID. You may also manually
set the SSID of the extended network.
Password
Enter the password or network key that you wish to use for
the extended 2.4 GHz network.
Schedule
Use the drop-down menu to select the time schedule that the
rule will be enabled for. The schedule may be set to Always
Enable or Always.
D-Link DRA-2060 User Manual
Smart Connect
2.4 GHz Extended Wi-Fi
31
Advertisement
Table of Contents
