Section 3 - Configuration
Smart Connect
Enable or disable the Smart Connect Feature. When enabled, only
a few configuration options are available to simplify configuration.
Extended Wi-Fi - Smart Connect Enabled
Status
Enable or disable the Extended Wi-Fi wireless network.
Wi-Fi Name (SSID)
This is the name of the DAP-1620's extended network. If using
Wi-Fi, the DAP-1620 will rebroadcast the uplink router's Internet
connection under this SSID. You may also manually set the SSID of
the extended network.
Password
Enter the password or network key that you wish to use for the
extended Wi-Fi network.
Schedule
Use the drop-down menu to select the time schedule that the rule
will be enabled for. The schedule may be set to Always Enable or
you can create your own schedules in the Schedules section. Refer
to "Schedule" on page 41 for more information.
Wireless - Smart Connect Disabled
Status
Enable or disable the 2.4 GHz network by toggling this slider.
Wi-Fi Name (SSID)
This is the name of the DAP-1620's extended network. If using
Wi-Fi, the DAP-1620 will rebroadcast the uplink router's Internet
connection under this SSID. You may also manually set the SSID of
the extended network.
Password
Enter the password or network key that you wish to use for the
extended 2.4 GHz network.
Schedule
Use the drop-down menu to select the time schedule that the rule
will be enabled for. The schedule may be set to Always Enable or
Always.
D-Link DAP-1620 User Manual
Smart Connect
2.4 GHz Extended Wi-Fi
36