Table of Contents
Advertisement
Section 3 - Configuration
This page allows you to save or restore your system configuration, reset, or reboot the DRA-2060. To access this page, click the
Management drop down menu at the top of the page, and select System.
Save Settings To Local
Save the system settings onto a file to the local hard drive. You
Hard Drive
will then see a file dialog where you can select a location and
enter a file name for the configuration file.
Load Settings From
Load the system settings from a previously saved file on the
Local Hard Drive
local hard drive. Click the Restore button that appears after
loading the system settings file to load the settings.
Restore to Factory
Restore the system settings to factory default settings. This
Default Settings
will erase all currently stored settings.
Reboot the Device
Click Reboot to reboot the DRA-2060.
D-Link DRA-2060 User Manual
System
38
Advertisement
Table of Contents
