Table of Contents
Advertisement
Section 3 - Configuration
The home screen gives a summary of the current status of devices connected to the DRA-2060. A green check between the device
and the uplink router indicates that there is an active connection. A red cross indicates that there is no connection present, or there
is a connection error. If there's no active uplink connection, click on the Click to Repair button to start the setup wizard.
Note: If the DRA-2060 is connected to a Wi-Fi Mesh supported router, then the home screen will only show the Firmware Upgrade
function. Other functions for the DRA-2060 can be configured from the router's configuration page. For more details, refer to "Home
- Connected to a Wi-Fi Mesh Router" on page 28.
Uplink Router
This icon shows the status of the Internet connection to the uplink router. It is grey if the DRA-2060 is not connected
to an uplink router. Once connected, click on it to see its connection details.
DRA-2060
Click on this icon to see details of the uplink network the DRA-2060 is connected to or connect to another uplink router.
Connected Clients
Click on the Connected Clients icon to see client details.
D-Link DRA-2060 User Manual
Configuration
Home
25
Advertisement
Table of Contents
