Table of Contents
Advertisement
Section 3 - Configuration
Smart Connect
Enable or disable the Smart Connect feature. When enabled,
fewer configuration options will be available to simplify
configuration. And the wireless network will transmit and
receive data on the 5GHz frequency if the client device
supports 5GHz.
Extended Wi-Fi - Smart Connect Enabled
Status
Enable or disable the Extended Wi-Fi wireless network.
Wi-Fi Name (SSID)
This is the name of the E15's extended network. If using
Wi-Fi, the E15 will rebroadcast the uplink router's Internet
connection under this SSID. You may also manually set the
SSID of the extended network.
Password
Enter the password or network key for clients to connect with
the extended Wi-Fi network.
Security Mode
Select a connection security requirement from the following:
None, WPA/WPA2-Personal, WPA2-Personal, WPA2/WPA3-
Personal, or WPA3-Personal. WPA3 provides the highest level
of encryption among these. Note that WPS will be disabled if
WPA3 is used.
Select the time during which the wireless network will be
Schedule
available. The schedule may be set to Always Enable or you
can add your own schedules.
To add a schedule:
Each box represents half an hour, with the clock time (0~23) at
the top of each column. To add a time period to the schedule,
simply click on the start time and drag to the end time. You
can add multiple days and multiple periods per day to the
schedule.
If Smart Connect is disabled, configure 2.4 GHz and 5 GHz
networks individually as shown below.
WPS-PBC Status
Enable or disable Wi-Fi Protected Setup (WPS).
D-Link E15 User Manual
Wi-Fi Protected Setup
Smart Connect
29
Advertisement
Table of Contents
