Advertisement
Quick Links
How to setup DRA-2060 as mesh extender?
Step 1: Connect to current Exo mesh router
Wifi.
Step 2: Open D-Link Wi-Fi Apps on the
Android mobile device.
Step 4: Click on Install New Device.
Step 6: a) Ensure you are connected to your
Wi-Fi Network.
b) Click on Next
Technical Support Setup Procedure
Step 3: Click on Menu Icon.
Step 5: a) Click on Scan the QR code.
b) Scan the QR code on the device.
Step 7: Wait for Detecting device to finish.
Page | 1
Advertisement
Related Manuals for D-Link DRA-2060
Summary of Contents for D-Link DRA-2060
- Page 1 Technical Support Setup Procedure How to setup DRA-2060 as mesh extender? Step 1: Connect to current Exo mesh router Step 3: Click on Menu Icon. Wifi. Step 2: Open D-Link Wi-Fi Apps on the Android mobile device. Step 4: Click on Install New Device.
- Page 2 Technical Support Setup Procedure Step 8: Click SELECT under Wirelessly. Step 9: a) Power on DRA-2060. b) Click on NEXT. Step 10: Wait for the device to boot up Step 11: a) Ensure the LED at the side of the device start to blink orange.
- Page 3 Technical Support Setup Procedure Step 14: a) Place DRA-2060 to the middle of the Step 15: a) Power on the device . home. b) Click on NEXT. b) Click on NEXT. Step 16: a) Wait for the status LED turn to solid Step 17: Click on NEXT.