Connecting Wireless Clients To The Extender; Wps Button - D-Link EXO AC2000 User Manual

Mesh range extender

Hide thumbs Also See for EXO AC2000:

Table of Contents

Section 5 - Connecting a Wireless Client

Connecting Wireless Clients to the Extender

Once an uplink network has been established, you may use the DRA-2060's WPS function to add additional wireless clients to your

extender's network. Many wireless devices such as wireless routers, media players, printers, and cameras will have a WPS button (or

a software utility with WPS) that you can press to connect to the DRA-2060. Please refer to the user manual for the wireless device

you want to connect to make sure you understand how to enable WPS. Once you are certain, follow the steps below:

Step 1 - Press the WPS button on the DRA-2060 for about 1 second. The LED on the device will start to blink.

Step 2 - Within 120 seconds, press the WPS button on your wireless device.

Step 3 - Allow up to 1 minute to configure. Once the LED light stops blinking and turns solid green, you will be connected and your

wireless connection will be secured with WPA2.

D-Link DRA-2060 User Manual

Table of Contents

Dra-2060