Media Player - K-array Thunder-KS User Manual

P R E L I M I N A R Y
Thunder-KS
User Guide
Volume
The Volume tab in the K-array-Connect mobile app provides
access to volume adjustments for the input and output
channels as well as the control of the signal gain at the
analogue, digital and media player input.
1. Touch the Routing tab in the tab menu at the bottom
of the screen: this will modify the buttons in the list of
available devices.
2. Select the device you want to configure and touch the
button to enter the volume adjustment section.
3. Three pages are available
for setting the input gain,
input level and output
level respectively: touch
the top menu buttons
according to the needed
adjustment.
12

Media Player

The Thunder-KS active subwoofer built-in DSP implements a
media player that can be used to playback audio files from a
USB device. The media player controls are accessible via the
on-board web app user interface: see "On-Board Web App",
page 13 for details.
The audio signals from the media players are routed by default
to the input channels 3 & 4 as well as the AES3 input signals.
Digital streaming
Media player
AES3
OUT
AES3
AES3
IN
Analog
Audio INPUT
Default routing diagram.
Subwoofer
transducer
Audio OUTPUT
OUT1 OUT2 OUT3 OUT4
IN1
IN2
IN3
IN4