Advertisement

Quick Links

INSTALLER: Leave this manual with party responsible for use and operation.
OWNER: Retain this manual for future reference.
Contact your dealer with questions regarding installation, operation or service.
NOTICE: DO NOT discard this manual!
MERIDIAN
SERIES
Models:
Models:
MERID36IN
MERID36IL
MERID42IN
MERID42IL
This appliance may be installed as an OEM
installation in manufactured home (USA
only) or mobile home and must be installed
in accordance with the manufacturer's
instructions and the Manufactured Home
Construction and Safety Standard, Title 24
CFR, Part 3280 in the United States, or the
Standard for Installation in Mobile Homes,
CAN/CSA Z240 MH Series, in Canada.
This appliance is only for use with the type(s)
of gas indicated on the rating plate. This
appliance is not convertible for use with other
gases, unless a certified kit is used.
In the Commonwealth of Massachusetts installation must be
performed by a licensed plumber or gas fitter.
See appliance installation manual for additional
Commonwealth of Massachusetts requirements.
Majestic • MERID36IN, MERID36IL, MERID42IN, MERID42IL Owner's Manual • 2517-981 Rev. E • 1/19
Owner's Manual
Care and Operation
WARNING:
FIRE OR EXPLOSION HAZARD
Failure to follow safety warnings exactly
could result in serious injury, death, or
property damage.
• DO NOT store or use gasoline or other flam-
mable vapors and liquids in the vicinity of this
or any other appliance.
• What to do if you smell gas
- DO NOT try to light any appliance.
- DO NOT touch any electrical switch. DO
NOT use any phone in your building.
- Leave the building immediately.
- Immediately call your gas supplier from
a neighbor's phone. Follow the gas sup-
plier's instructions.
- If you cannot reach your gas supplier, call
the fire department.
• Installation and service must be performed
by a qualified installer, service agency, or the
gas supplier.
A barrier designed to reduce the risk of
burns from the hot viewing glass is provided
with this appliance and shall be installed for
the protection of children and other at-risk
individuals.
DANGER
HOT GLASS WILL
CAUSE BURNS.
DO NOT TOUCH GLASS
UNTIL COOLED.
NEVER ALLOW CHILDREN
TO TOUCH GLASS.
1

Advertisement

Table of Contents
loading

Summary of Contents for Hearth & Home Majestic MERIDIAN Series

  • Page 1 Owner’s Manual Care and Operation INSTALLER: Leave this manual with party responsible for use and operation. OWNER: Retain this manual for future reference. Contact your dealer with questions regarding installation, operation or service. NOTICE: DO NOT discard this manual! WARNING: FIRE OR EXPLOSION HAZARD Failure to follow safety warnings exactly MERIDIAN...
  • Page 2: Welcome

    Welcome Read this manual before operating this appliance. Please retain this Owner’s Manual for future reference. Read the Installation Manual before making any installation or finishing changes. A. Congratulations This owner’s manual should be retained for future reference. We suggest that you keep it with your other Congratulations on selecting a Majestic gas fireplace, an important documents and product manuals.
  • Page 3: Table Of Contents

    Safety Alert Key: • DANGER! Indicates a hazardous situation which, if not avoided will result in death or serious injury. • WARNING! Indicates a hazardous situation which, if not avoided could result in death or serious injury. • CAUTION! Indicates a hazardous situation which, if not avoided, could result in minor or moderate injury. •...
  • Page 4: Limited Lifetime Warranty

    B. Limited Lifetime Warranty Hearth & Home Technologies LIMITED LIFETIME WARRANTY Hearth & Home Technologies, on behalf of its hearth brands (“HHT”), extends the following warranty for HHT gas, wood, pellet, coal and electric hearth appliances that are purchased from an HHT authorized dealer. WARRANTY COVERAGE: HHT warrants to the original owner of the HHT appliance at the site of installation, and to any transferee taking ownership of the appliance at the site of installation within two years following the date of original purchase, that the HHT appliance...
  • Page 5 WARRANTY CONDITIONS: • This warranty only covers HHT appliances that are purchased through an HHT authorized dealer or distributor. A list of HHT authorized dealers is available on the HHT branded websites. • This warranty is only valid while the HHT appliance remains at the site of original installation. •...
  • Page 6: Product Specific Information

    Product Specific Information A. Appliance Certification B. Glass Specifications (Tempered) Hearth & Home Technologies appliances manufactured with tempered glass may be installed in hazardous lo- MODELS: MERID36IN, MERID36IL, cations such as bathtub enclosures as defined by the MERID42IN, MERID42IL Consumer Product Safety Commission (CPSC). The LABORATORY: Underwriters Laboratories, Inc.
  • Page 7: Important Safety And Operating Information

    Important Safety and Operating Information A. Appliance Safety • Teach children to NEVER touch the fireplace. WARNING! DO NOT operate fireplace before reading • Consider not using the fireplace when children will be and understanding operating instructions. Failure present. to operate fireplace according to operating instructions Contact your dealer for more information, or visit: www.
  • Page 8: General Operating Parts

    B. General Operating Parts D. Good Faith Wall Surface/TV Guidelines Figure 3.2 references the general operating parts of the FIREPLACE appliance and the section of this manual in which they are OPENING TO CEILING discussed. 127°F 123°F 132°F 30 in. 135°F 24 in.
  • Page 9 Good Faith Guidelines for TV Installa ons above a Typical Gas Fireplace TV recessed into the wall TV on the wall TV Wall Bracket Item Minimum Dimensions 2.5 inches 2 inches minimum to 3 inches maximum 18 inches Wall Brkt + TV Thickness + 2.5 inches Mantel Fireplace...
  • Page 10: Before Lighting Appliance

    E. Before Lighting Appliance Before operating this fireplace for the first time, have a qualified service technician: • Verify all shipping materials have been removed from inside and/or underneath the firebox. • Review proper placement of logs, ember material and/or other decorative materials.
  • Page 11: Lighting Instructions (Ipi)

    F. Lighting Instructions (IPI) FOR YOUR SAFETY READ BEFORE LIGHTING WARNING • Immediately call your gas supplier from a neighbor’s phone. Follow the gas sup- A. This appliance is equipped with an intermittent pilot ignition (IPI) device which plier’s instructions. automatically lights the burner.
  • Page 12: Appliance Break-In

    G. Appliance Break-In H. Heat Management Follow the initial break-in procedure below to cure the Heat Output materials used to manufacture the fireplace and the This model has a variable burn rate which is controlled by finishing materials around it. the command on the optional remote control, if installed.
  • Page 13: Operation During A Power Outage - Intellifire™ Touch

    I. Operation During A Power Outage - IntelliFire™ Touch The IntelliFire™ Touch intermittent pilot ignition system To Return to Operation Using Electrical (AC) Power comes with a battery backup system that enables the Standard Wall Switch or Factory-Installed ON/OFF system to operate in a power outage. The system offers Switch: seamless transition from household AC power to battery •...
  • Page 14: Detailed Component Operating Instructions - Intellifire™ Touch

    J. Detailed Component Operating 3. The Pilot button on the IFT-ECM activates the Cold Climate function of the fireplace. This function lights Instructions - IntelliFire™ Touch the pilot flame ONLY to provide enough heat in the IFT-ECM Detailed Operating Instruction firebox to reduce condensation in cool, high humidity ambient conditions.
  • Page 15 IntelliFire Touch Ignition System - Wait five (5) minutes to allow possible accumulated gas to clear. NOTICE: Batteries should not be placed in the battery - Set the IFT-ECM 3-position selector switch to ON pack while using the transformer. Remove batteries before or REMOTE position.
  • Page 16: Maintenance And Service

    Maintenance and Service B. Maintenance Tasks - Homeowner Any safety screen or guard removed for servicing must be replaced prior to operating the fireplace. Installation and repair should be done by a qualified service technician only. The appliance should be inspected before use and at least annually by a professional service person.
  • Page 17 • Assess condition of screen and replace as necessary. Removing/Replacing Fixed Glass Assembly • Inspect for scratches, dents or other damage and repair • Pull the four glass assembly latches out of the groove as necessary. on the glass frame. Remove glass assembly from the appliance (see Figure 4.1).
  • Page 18: Maintenance Tasks - Qualified Service Technician

    C. Maintenance Tasks - Qualified Service Burner Ignition and Operation Technician Frequency: Annually The following tasks must be performed by a qualified ser- By: Qualified Service Technician vice technician. Tools needed: Protective gloves, vacuum cleaner, whisk Gasket Seal and Glass Assembly Inspection broom, flashlight, voltmeter, indexed drill bit set, and a manometer.
  • Page 19 Optional Black Glass Refractory Burner Identification/Verification Frequency: Annually The burner may be accessed for identification and veri- fication purposes. This task should be performed by a By: Qualified Service Technician qualified service technician. Only the log/grate assembly Tools needed: Protective gloves, dust cloths, non-abra- and burner skirt need to be removed in order to identify sive glass cleaner burner.
  • Page 20: Frequently Asked Questions And Troubleshooting

    Frequently Asked Questions and Troubleshooting A. Frequently Asked Questions - Appliance ISSUE SOLUTIONS This is a result of gas combustion and temperature variations. As the fireplace warms, this Condensation on the glass condensation will disappear. This is a result of normal operation and the flames will begin to yellow as the fireplace is al- Blue flames lowed to burn for 20 to 40 minutes.
  • Page 21: Frequently Asked Questions - Intellifire™ Touch Controls (Ift-Rc400) (Optional Remote)

    B. Frequently Asked Questions - IntelliFire™ Touch Controls (IFT-RC400) (Optional Remote) Symptom Possible Cause Corrective Action The appliance does not respond to Batteries are depleted. Verify batteries are new. commands from the remote control display does not light up when Batteries are incorrectly Verify batteries are installed in correct orientation as shown on screen is touched.
  • Page 22: Troubleshooting

    C. Troubleshooting With proper installation, operation, and maintenance your gas appliance will provide years of trouble-free service. If you do experience a problem, this troubleshooting guide will assist a qualified service technician in the diagnosis of a problem and the corrective action to be taken. This troubleshooting guide can only be used by a qualified service technician. Contact your dealer to arrange a service call by a qualified service technician.
  • Page 23 Intellifire™ Touch - (continued) Symptom Possible Cause Corrective Action Verify incoming gas line ball valve is ‘Open’. Verify inlet pres- No gas supply. sure is within requirement for gas type used. Contact gas sup- plier. Pilot sparks for 60 sec, but will not Verify wiring, check valve harness black wire is securely ECM has poor ground.
  • Page 24: Reference Materials

    Reference Materials A. Accessories Install approved accessories per instructions included with accessories. Contact your dealer for a list of ap- proved accessories. WARNING! Risk of Fire and Electric Shock! Use ONLY Hearth & Home Technologies-approved optional acces- sories with this appliance. Using non-listed accessories could result in a safety hazard and will void the warranty.
  • Page 25: Service Parts

    MERID36IN, MERID36IL B. Service Parts Service Parts Meridian 36” Gas Fireplace - DV Beginning Manufacturing Date: Mar 2018 Ending Manufacturing Date: Active Log Set Assembly IMPORTANT: THIS IS DATED INFORMATION. Parts must be ordered from a dealer or distributor. Hearth and Stocked Home Technologies does not sell directly to consumers.
  • Page 26 MERID42IN, MERID42IL Service Parts Meridian 42” Gas Fireplace - DV Beginning Manufacturing Date: Mar 2018 Ending Manufacturing Date: Active Log Set Assembly IMPORTANT: THIS IS DATED INFORMATION. Parts must be ordered from a dealer or distributor. Hearth and Stocked Home Technologies does not sell directly to consumers. Provide model number and serial number when requesting service parts from your dealer or distributor.
  • Page 27 MERID36IN, MERID36IL, MERID42IN, MERID42IL Beginning Manufacturing Date: Mar 2018 Ending Manufacturing Date: Active #15 Valve Assembly 15.1 15.11 15.2 15.3 15.13 15.12 15.4 15.5 15.6 15.10 15.9 15.8 15.7 IMPORTANT: THIS IS DATED INFORMATION. Parts must be ordered from a dealer or distributor. Hearth and Stocked Home Technologies does not sell directly to consumers.
  • Page 28 MERID36IN, MERID36IL, MERID42IN, MERID42IL Beginning Manufacturing Date: Mar 2018 Ending Manufacturing Date: Active IMPORTANT: THIS IS DATED INFORMATION . Parts must be ordered from a dealer or Stocked Hearth and Home Technologies does not sell directly to consumers distributor. . Provide model number and serial number when requesting service parts from your dealer or distributor.
  • Page 29: Contact Information

    C. Contact Information Majestic, a brand of Hearth & Home Technologies 7571 215 Street West, Lakeville, MN 55044 www.majesticproducts.com Please contact your Majestic dealer with any questions or concerns. For the location of your nearest Majestic dealer, please visit www.majesticproducts.com. - NOTES - ________________________________________________________________________________ ________________________________________________________________________________...

Table of Contents