Lanview Led Indications - Cabletron Systems SWPIM-DDS Installation Manual

Chapter 1: Installation
10. The SWPIM-DDS must be configured before the WAN connection is
made. Once the SWPIM-DDS has been configured, the host platform
must undergo a soft or hard restart in order for the SWPIM-DDS to be
recognized and for traffic to pass. Refer to the appropriate software
manual to configure the SWPIM-DDS.
1.3

LANVIEW LED INDICATIONS

Refer to Table 1-1
SWPIM-DDS.
Color
Off
Red
Amber
Green
Blinking Green
Refer to Table 1-1
SWPIM-DDS.
Color
Off
Amber
Blinking Amber
1-4
for the Link (LNK) LED indications for the
Table 1-1 Link (LNK) LED
for the Status (STS) LED indications for the
Table 1-2 Status (STS) LED
Indication
Disabled or Not Configured
No Link
Transmit or Receive Traffic
Port is Active
Port is in Standby
Indication
Normal or Disabled
Out of Service
Port in Test Mode
SWPIM-DDS Installation Guide