Only qualified personnel should perform installation
procedures.
Welcome to the Cabletron Systems SWPIM-DDS Installation Guide. This
manual gives an introduction to the SWPIM-DDS, lists features and
capabilities, details the cabling pinouts, and explains how to install the
SWPIM-DDS.
The SWPIM-DDS (Sliding WAN Physical Interface Module) provides
remote connectivity using Digital Data Service (DDS), to extend the
functionality for a host platform designed to receive the SWPIM
architecture.
The term "host platform" may be used to indicate the device or
NOTE
module, such as the SSR-600 or the HSIM-SSR-600, into
which the SWPIM-DDS is installed.
USING THIS GUIDE
Read through this guide completely to understand the features and
capabilities of the SWPIM-DDS.
A general working knowledge of WAN and Ethernet and IEEE 802.3 data
communications networks and their physical layer components is helpful
before using the SWPIM-DDS.
STRUCTURE OF THIS GUIDE
This guide is organized as follows:
This
Introduction
this manual, lists technology and user's guides that may help the user to
set up and manage the SWPIM-DDS, gives an overview of the
SWPIM-DDS and its features, and information on how to get help from
Cabletron Systems.
Chapter
1, Installation, provides instructions on how to install the device
into a host platform, and gives the LED indications.
SWPIM-DDS Installation Guide
INTRODUCTION
provides preliminary information that will aid in using
xiii