Drive Rollers & Torch Liners For Different Wires - Weldclass Weldforce 155M Operating Instructions Manual

Table 4
*Use chart as guide only, as optimal settings will vary with weld joint type and operator technique.
7.1.1 Drive Rollers & Torch Liners for different Wires
Following are recommended drive rollers and MIG torch liners to use for various wires.
Weldforce 155M:
Weldforce 175MST:
Wire Type
0.8mm
Gasless/Flux-
Cored Steel 0.9mm
0.6mm
0.8-0.9mm
Solid Steel
0.6mm
0.8-0.9mm
Stainless-Steel 0.8mm
0.9mm
Aluminium
1.0mm
Bronze 0.8mm
(CuSi/CuAl)
Table 5
Weldforce 175MST
Wire
Size
Knurled Groove
V-Groove
U-Groove
U or V-Groove
© Weldclass 2020 | E.&O.E.
Weldforce 155
Drive Roller
Type
WC-06425
WC-06422
WC-06426
WC-06422
175
M & MST
Torch
Part No. Liner
Blue
Red
Blue
Red
Blue
Red
Blue
Teflon /
Poly
21