en
Erasing Personal Data
1. Press
to turn on the power without removing the control panel from the device.
is displayed, press .
2. After
3. Select the ID number to be deleted using the and buttons.
4. Press and hold for more than 3 seconds.
using the and buttons.
5. Select
6. Press to confirm.
The personal data to be deleted is displayed then deleted.
Deleting personal data connected to a smart phone also causes measurement data
to be deleted from the device.
Note:
・Press to cancel a selection or turn off the power.
・If you forget to turn off the power, the device automatically turns off (display turns off) in the following cases:
If no operations are performed on the measuring platform for more than 60 seconds
If no weight is detected on the measuring platform at any time during measurement
If a single measurement result is displayed for more than 40 seconds
22
is displayed.