Table of Contents
Advertisement
en
Taking Measurements Without Registering
Guest User Measurements
1.Press to turn on the power without removing the control panel.
2.After
is displayed, press
3.Select your age,follwed by your gender ,height and heart rate using the
4.After the information you have entered has been displayed and
remove the control panel from the device and carefully step barefoot onto the
measuring platform.
Note:
・Please refrain from moving during measurement.
・Measurements cannot be taken accurately if the control panel is being held or
resting on the floor before is
5.Step off the measuring platform when you hear it beep.
The device automatically turns off after measurement results have been displayed.
When you are finished reviewing your measurements, return the control panel to its
original position.
Note:
Age can be set from 7 to 99.
Weight Only Measurements
1 Press
to turn on the power without removing the control panel from the device.
2. After
is displayed, step onto the measuring platform without holding the
control panel.
3. If you hear a beep when your weight is displayed, step off the measuring platform.
Note:
・Although
is displayed, step onto the monitor
without holding the control panel.
This method is most convenient for one-time users as personal data and
measurement results are not stored.
Note:
・If the auto-recognition function discovers multiple possible candidates for the current user, the device automatically switches
to the ID selection mode after body composition measurement is complete (pg. 15).
Select your ID number using the
*If the device repeatedly switches to ID selection mode, enter your ID before conducting a measurement (pg. 15).
・If you forget to turn off the power, the device automatically turns off (display turns off) in the following cases:
If no operations are performed on the measuring platform for more than 60 seconds
If no weight is detected on the measuring platform at any time during measurement
If a single measurement result is displayed for more than 40 seconds
16
and press to confirm.
, select
is displayed.
and
buttons, then press
(Guest User Measurements / Weight Only Measurements)
and
buttons.
is displayed,
Set button
to confirm.
On/Off button
Up/Down button
On/Off button
Hide quick links:
Advertisement
Table of Contents
