Changing Personal Data - Tanita InnerScan Pro RD-545PRO Instruction Manual

Changing Personal Data

1. Press to turn on the power without removing the control panel from the device.
2. After is displayed, press
3. Select your ID number (1-4) using the
Note:
・If you have entered a nickname into the app settings and connected the body
composition monitor to your smartphone, your nickname is displayed instead
of your ID number.
4. Press to confirm.
Follow the steps as listed on pg. 10 to change your personal data.
Adjusting Date of Birth / Gender
is displayed.
using the and buttons.
1.Select
2.Press to confirm.
3.After is displayed, carefully step barefoot onto the measuring platform.
(Measurement procedures, pg. 7)
The power automatically turns off after the adjusted personal data and measurement
results have been displayed.
Using the clear function to change personal data via a connected smartphone
erases any data saved before the change, as well as any data stored in the device.
Note:
・You must connect your smartphone to use an app.
Set up the body composition monitor according to the "Setup via Smartphone" (pg. 8)
instructions.
・If
is selected, data cannot be overwritten.
・Press to cancel a selection or turn off the power.
・If you forget to turn off the power, the device automatically turns off (display turns off) in the following cases:
If no operations are performed on the measuring platform for more than 60 seconds
If no weight is detected on the measuring platform at any time during measurement
If a single measurement result is displayed for more than 40 seconds
.
and buttons.
en
21