Erasing Personal Data
1. Press
to turn on the power without removing the control panel from the device.
2. After
is displayed, press
3. Select the ID number to be deleted using the
4. Press and hold
for more than 3 seconds.
5. Select
using the
and
6. Press
to confirm.
The personal data to be deleted is displayed then deleted.
Deleting personal data connected to a smart phone also causes measurement data
to be deleted from the device.
Note:
・Press
to cancel a selection or turn off the power.
・If you forget to turn off the power, the device automatically turns off (display turns off) in the following cases:
If no operations are performed on the measuring platform for more than 60 seconds
If no weight is detected on the measuring platform at any time during measurement
If a single measurement result is displayed for more than 40 seconds
.
and
buttons.
is displayed.
buttons.
en
21