Table of Contents
Advertisement
en
Initial Setup (Type 2) From Body Composition Monitor
You first need to enter your personal information (date of birth, gender, height) before you take a measurement. Once this information
has been registered, it is recalled when you turn the power on and step on the body composition monitor, enabling you to use the
device easily every day without the hassle of entering information each time.
Body composition must be registered. Only take measurements while barefoot.
Place the body composition monitor on a hard, flat, stable surface.
ID Number Registration
1.With the control panel stored in the body of the device, press to turn the power on.
is displayed, press .
2. After
3. Select your ID number (1-4) using the and buttons.
4. Press to confirm.
Note:
・The backlight color changes depending on the registered ID.
1.Blue
2.Pink
・If any information is registered incorrectly, briefly turn off the device by
pressing
. After turning it back on, press
from the beginning.
・Press
to cancel a selection or turn off the power.
Date of Birth Registration
1.Select your birth year using the
2.Press
to confirm.
Note:
1900 is the earliest year that can be set.
1.Select your birth month using the
2.Press
to confirm.
1.Select your birth day using the
2.Press
to confirm.
10
3.White
4.Sky Blue
and re-enter your information
and
buttons.
and
buttons.
and
buttons.
Guest: Purple
Set button
On/Off button
Up/Down button
Hide quick links:
Advertisement
Table of Contents
