Changing Personal Data - Tanita BC-333LE Instruction Manual

Changing Personal Data

1. When the power is off, press
2. Select your ID number (1-5) using the
3. Press to confirm.
Follow the steps as listed on pg.9 to change your personal data.
Adjusting Date of Birth / Gender
is displayed.
1.Select using the
2.Press to confirm.
3.After " " (0.0lb, 0.0stlb) is displayed, carefully step barefoot onto the measuring platform.
kg
(Measurement procedures, pg. 9)
The power automatically turns off after the adjusted personal data and measurement
results have been displayed.
Using the clear function to change personal data via a connected smartphone
erases any data saved before the change, as well as any data stored in the device.
Note:
・You must connect your smartphone to use an app.
Set up the body composition monitor according to the "Setup via Smartphone" (pg. 8)
instructions.
・If
is selected, data cannot be overwritten.
・Press
to cancel a selection or turn off the power.
・If you forget to turn off the power, the device automatically turns off (display turns off) in the following cases:
If no operations are performed on the measuring platform for more than 60 seconds
If no weight is detected on the measuring platform at any time during measurement
If a single measurement result is displayed for more than 40 seconds
.
buttons.
buttons.
en
15