Taking Measurements Without Registering
Guest User Measurements
Guest mode allows you to program the monitor for one-time use without using the ID number.
Press the button to select "GUEST", then press the button.
Next, follow the steps below:
Set the age, gender (male/ female/ male athlete/ female athlete) and height.
Step onto the monitor after "
The readings are displayed for 40 seconds.
Note:
The age range is from 5 to 99.
Who should use Athlete Mode?
Adults aged 18 years and over who either:
・Train or exercise for 12 hours or more a week and have been doing so for at least six months.
・Are body builders.
・Are professional athletes who want to monitor their progress at home.
・Have a lifetime history of fitness and who used to do more than 12 hours a week but do less now.
・Do not step off until "
Weight Only Measurements
Press the button. After 2 or 3 seconds, "
When "
" (0.0lb, 0.0stlb) is displayed, step onto the monitor.
kg
The body weight measurement is displayed, and the monitor power turns
off automatically after approximately 20 seconds.
Note:
・If you forget to turn off the power, the device automatically turns off (display turns off) in the following cases:
If no operations are performed on the measuring platform for more than 60 seconds
If no weight is detected on the measuring platform at any time during measurement
If a single measurement result is displayed for more than 40 seconds
" (0.0lb, 0.0stlb) is displayed.
kg
" disappears.
"(0.0lb, 0.0stlb) is displayed.
kg
(Guest User Measurements / Weight Only Measurements)
en
13