Taking A Measurement; Body Composition Mode - Tanita DC-430MA III Instruction Manual

Taking a Measurement

Body Composition Mode

1
Enter the preset tare value (clothes weight)
Turn the power on, and check that the
" " mark is displayed.
Enter the preset tare value (clothes weight)
The tare value range is 0.0 to 10.0kg
2
Enter ID number
If the ID number function is set to OFF, the scale switches
directly to "Measure body weight" without requesting an
ID number.
If the ID number is set to ON, ID number will be increased
automatically.
To change ID number manually, press
The ID number range: 0 to 9999999999999999
Note
3
Measure body weight
Step onto the platform with bare feet, after "
" " is displayed when you have entered a tare value
(clothes weight).
The "Stabilised" icon (
Note
When the One step fl ow is selected, enter personal information fi rst.
→ See P.13 Setting 8
If the scale does not detect a load, press
If the scale detects the load, press
4
Select body type
If the body type selection (Athletic mode) is set to OFF,
the scale switches directly to "Select gender" without
requesting a body type.
The " " mark is displayed when the Athletic mode is
selected.
Note
ID number setting → See P.13 setting 7
) appears when the load is stable.
Athletic mode setting → See P.13 Setting 9
Athlete condition → See P.30
(
Two step fl ow
Measure body weight fi rst
and enter the preferred ID number.
" fl ashes.
to switch to "Input tare value".
to display the entered tare value.
)
15 15