Enterasys RoamAbout AP-2000 Hardware Installation Manual page 39

8. If you install the optional range extender antenna or
outdoor antenna:
— Remove the dust cover.
— Insert the antenna plug into the PC Card
connector.
— Gently press down on the plug to secure the
antenna connection.
9. Install the remote power injector or the rack mount kit, if used.
Refer to Remote Power Injector Installation on page 2-3
Installation on page
Connect the output of the remote power module to the PWR jack on the remote power
injector.
2-5.
Surface Wallmount Installation
or the Rack Mount Kit
Installing the Access Point 3-11