Using Your Mower - Webb WERR19SP Operator's Manual & Parts List

INSTRUCTION MANUAL

USING YOUR MOWER

Fig 9
Fig12
Attach the Grass Collection Bag
The grass collection bag attaches
easily by lifting the mower's Rear Flap
with one hand (Fig. 9) and slide the
grass collection bag into position (Fig.
10).
Cutting Height Adjustment
! Turn mower off before
WARNING!
adjusting cutting height lever
For best results adjust the cutting
height of your mower to suit the
mowing conditions. Do not try to
remove too much grass in one pass.
Adjustment of the cutting height is
made centrally. Turn off the mower
and take the weight of the mower
by lifting. Take hold of the cut height
adjustment lever, positioned on the
mower's right hand rear wheel.
Move the lever inwards to release
it from its locating notch. Move
the lever down machine to increase
the cutting height.
To reduce the cutting height move the
lever upwards. Return the lever to
the locating notch to set the desired
cutting height.
securely into its serrated holder (Fig.
11).
Mowing your Lawn
Start your mower (see: Starting
the engine). Keep hold of the Brake
(OPC) Lever (releasing the Brake
(OPC) Lever will stop the engine to
avoid accidents) (Fig. 12). To power
the mower forward move the Drive
Fig10
Fig13
Lever up and forward (Fig. 13). The
mower can be pushed with the drive
disengaged for more precise handling.
After mowing and emptying the Grass
Collection Bag ensure the engine is not
running and turned off.
Cleaning your Mower
!
WARNING!
Turn mower off before cleaning
Cut grass is damp. Regular cleaning
after each use will ensure better
functioning of the mower and reduce
the risk of corrosion or seizure.
the engine to cool then remove
accumulated grass clippings from and
around the engine with a brush. Clean
the grass collection bag annually with
a brush or gentle spray of water and
allow to dry.
Clean underneath regularly -
disconnect the spark plug cap and tilt
the mower backwards. Remove cut
grass with a scraper and a brush.
Do not use a pressure washer or hot
water to clean the mower. Dry off the
machine before storing by leaving it
clean surface to prevent corrosion or
seizure.
Storing your Mower
Store your mower in a dry, well-
sparks or heat sources. Disconnect the
spark plug cap. Avoid storing beneath a
tarpaulin or similar cover as it may
cause condensation resulting in
corrosion.
10
Fig11
Winter Storage:
Thoroughly clean the mower. Run
the engine outdoors until fuel tank
is empty or empty fuel using a fuel
suction pump. Dispose of discarded
fuel safely and responsibly. Run
the engine until remaining fuel is
consumed.
Remove the spark plug from the
engine. pour a tablespoon of engine
oil into the cylinder. Gently pull the
starter rope several times to distribute
the oil to protect the cylinder over
winter. Replace and tighten the spark
plug.
Transporting your Mower
Ensure the fuel tank is empty. Run
the engine until any remaining fuel is
consumed. Allow the engine to cool.
How to cut for best results
For best results cut your lawn in
alternative directions switching
direction each time you cut. Cut your
lawn at an equal and regular height.
Slightly overlap your cutting lines.