Table of Contents
Advertisement
The CyberSWITCH will perform the address translation between the fixed IP Addresses assigned
to your CyberSWITCH and all worklstations on the LAN (or Ethernet port).
This function, when enabled allows for three modes of Routing Information
WAN RIP —
Protocol to be used over the WAN:
•
RIP 1 Compatible = This function allows your CyberSWITCH to listen to RIP type 1, and
RIP type 2 packets, but only broadcast RIP type 1 packets.
•
RIP 1 = This function allows your CyberSWITCH to listen to and broadcast RIP type 1
packets only.
•
RIP 2 = This function allows your CyberSWITCH to listen to and broadcast RIP type 2
packets only.
•
RIP Off = Disables the CyberSWITCH's ability to detect and respond to any RIP packets.
Click the Next button when you have finished, and the Save button to save your configuration data
and reboot your CyberSWITCH.
Planning Your Router's Configuration
CyberSWITCH 100 Advanced User Information 37
Advertisement
Table of Contents
Need help?
Do you have a question about the CyberSWITCH CSX101 and is the answer not in the manual?