Product Guideline - Bluetti EB70 User Manual

Just Power on
Input Voltage
Current
Estimated Time
Note：PV Input, T200S AC Adapter/Generator/Lead-acid Charging share the same
Aviation Port.

11. PRODUCT GUIDELINE

Most electrical appliances on the market apply to the specifications of the
12V/10A, cigarette lighter, USB-A, and USB-C output ports of BLUETTI EB70S.
But, there are still charging of some appliances that generate an excessive
instantaneous inrush current may activate the over-current protection.
The EB70S applies to home appliances with 800W or less output power.
Though the rated output power is under 800W, overload protection will still
be activated if the appliance generates a massive instantaneous start-up
power. Therefore, it is recommended to apply the EB70S to the electrical
equipment with lower-rated power.
If an output over-current, overload, or short circuit occurs, the EB70 will
turn off the corresponding output port. Then it will automatically start again
(at an interval of 20S). Suppose there is still an over-current, overload, or short
circuit; the equipment will lock the output ports and then need manual
troubleshooting and restart again. If the outputs repeatedly stop, turn the
equipment off. Please get in touch with the seller or maintenance personnel
for professional help.
When the battery level drops to 0%, the AC and DC outputs will automatically
turn off. Please check the battery level before using the AC/DC output to
maintain long battery life. If the battery level drops to 20% or less, it is advised
to recharge the equipment first.
The EB70 supports pass-through charging, and please keep the equipment
laid flat during use, charging, and discharging.
Note: It is not suggested to apply the EB70 to charge some radios or video
players.
Car Charging
12V: 7-8 hrs; 24V: 4-5 hrs
- 12 -
12V-24V
8A Max