T200S: 200W AC Adapter DOD: Depth of Discharge ECO: A power-saving setting for the EB70. When it is on, the AC power will automatically turn off over 4 hours low(≤10W) or no load to save power drain. - 01 -...
DO operate the EB70 in a dry and well-ventilated place. If it gets moisturized or damp, please dry it thoroughly before using it. Be sure to check all materials before using the EB70. In case of any abnormality such as breakage, crack, leakage, or AC line breakage, please stop using the equipment immediately.
4. PACKAGE LIST Please kindly check all the accessories are complete. The package list includes the BLUETTI EB70 Portable Power Station, T200S AC Adapter & Charging Cable, Car Charging Cable, PV Charging Cable, User Manual, Warranty Card, and QC certificate.
BLUETTI 5. KEY FEATURES QUICK GUIDE Charging Port USB-C Port LCD Screen USB-A Port Wireless Charging Pad DC 5521 Output Port LED Lamp Button Cigarette Lighter Port LED Lamp AC Power Button DC Power Button AC Outlet - 04 -...
Just Power on 6. GETTING STARTED The BLUETTI EB70 has separate AC and DC power buttons. Press either of them to startup or shut down the specified port area. (1) Turn on AC/DC: short press the AC/DC power button; both the indicator light and LCD screen will be on, and the LCD screen will be off several seconds later.
8.1 Charging with AC wall outlet Connect the adapter input plug to the wall outlet, the other end to the AC charging input port of EB70. The equipment comes with a built-in advanced control circuit. When it is fully charged(Approx. 4-5hrs), it will stop charging automatically.
8.2 Charging with solar panel Connect the solar panels(in series or parallel) with the open-circuit voltage range: 12-28V. Then connect the solar panel to EB70 via the solar charging cable. When charging with solar panels, the max input current and power are 8A and 200W, respectively.
8.4 Charging with generator Connect the AC adapter input plug to the generator and the output plug to the AC charging port of EB70. As the same again, when it is fully charged (Approx. 4-5hrs), it will stop charging automatically.
716Wh×DOD×η÷ (the current load power W) = available time(unit: hrs/times) Note:DOD indicates Depth of Discharge, η indicates inverter efficiency, DOD=90% , η=90%. 10. TECHNICAL SPECIFICATIONS Model No. BLUETTI EB70 Battery Capacity 716Wh / 32,000mAh @22.4V Battery Cell Type LiFePO4 (2500+ Life Cycles) Dimensions 12.6 x 8.5 x 8.7 in.
Page 13
BLUETTI AC Output* 4 Rated Output Power 100-120V 800W US/JP 220-240V 1000W EU/UK/AU Surge 1400W Frequency 50-60HZ DC Output Ports Voltage Current Cigarette Lighter DC5521*2 USB-A *2 USB-C PD3.0 *2 100W Max (5V/3A, 9V/3A, 12V/3A, 15V/3A, 20V/3A, 20V/5A) 15W Max...
first. The EB70 supports pass-through charging, and please keep the equipment laid flat during use, charging, and discharging. Note: It is not suggested to apply the EB70 to charge some radios or video players. - 12 -...
CPAP users. How can I clean the EB70 power station? Dry and non-abrasive cloths to wipe will be perfect. The EB70 is a versatile tool for various adventures, simple cleaning from time to time is necessary to keep the equipment in good condition.
13. DECLARATION Please note that specifications and appearance are subject to improvement without prior notice. The company shall not be liable for any damage caused by force majeure, such as fires, typhoons, floods, earthquakes, or the user's intentional negligence, misuse, or other abnormal conditions. The company shall not be liable for any accidents or damages caused by failure to follow the precautions in the instruction manual.
Need help?
Do you have a question about the EB70 and is the answer not in the manual?
Questions and answers