Overcoming Paper Jams - Mitsubishi Electric CP-M15 Operation Manual

ERROR MESSAGES AND COUNTERMEASURES
Press the latch bar, pull out the printing unit forward, and
release the bar to open the door.
Make sure that the power is turned on before opening the printing unit.
Remove the paper strip bin.
Remove the ink ribbon.
Pull out the defective part of the print paper to the direction of
an arrow.
Cut off the defective part of the print paper with scissors.
• Make sure to cut off the printed part of the print paper. Failure to do this
may result in the ink ribbon sticking to the print paper and being torn.
• Make sure to clean the thermal head and the platen roller.
"CLEANING" (on pages 19 and 20).
Remove the print paper.
Re-install the print paper and ink ribbon.
Make sure the Power is ON before reinstalling the print paper and ink ribbon.
Attach the paper strip bin.
Hold the door down and slide the print unit in without pressing
the latch bar on top of the door.

OVERCOMING PAPER JAMS

NOTE
(Refer to pages 10-12.)
Refer to
16