Initial start−up, inspection and maintenance
Gas burner control unit
Display and programming unit
Function
A display and programming unit is
integrated into the gas burner
control unit. The display indicates
the respective operating conditions,
the service and parameter conditions
as well as all fault and error
messages.
Status Service
24
The display comprises three,
seven−segment elements; four keys
enable settings to be adjusted at
different operating levels. A DIP
switch on the back of the display and
programming unit enables burner
parameters to be configured (for
settings, see page 28).
A Reset button
B Decimal point
will be set if a display value
A
exceeds 99
C Memory LED
B
C
will be set if a value is saved
D Selection key (select)
o
D