Checking The Ignition And Ionisation Electrodes - Viessmann MatriX Service Instructions Manual
Pressure−jet gas burner, for vitocrossal300, typect3 rated output 187 to 314kw
Hide thumbs
Also See for MatriX:
- Service instructions for contractors (52 pages) ,
- Service instructions manual (48 pages) ,
- Service instructions for contractors (56 pages)
Table of Contents
Advertisement
Initial start−up, inspection and maintenance
Further details regarding the individual steps
Checking the ignition and ionisation electrodes
Ignition electrodes
3.5
Ionisation electrode
18
+
0.5
−
(cont.)
1. Check the ignition electrodes and
the ionisation electrode for correct
gap towards the burner gauze and
for damage (replace, if necessary).
2. Close the boiler door and tighten
the screws on the boiler door
diagonally.
Advertisement
Table of Contents
