Table of Contents
Advertisement
30
www.aeg.com
support the self-cleaning procedure, heat
the empty oven on a regular basis.
Clean the oven with catalytic cleaning
Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
11.5 How to remove: Grill
WARNING!
There is a risk of burns.
Step 1
Step 2
Step 3
Step 4
Step 5
11.6 How to remove and
install: Door
You can remove the door and the
internal glass panels to clean it. The
number of glass panels is different for
different models.
WARNING!
The door is heavy.
Turn off the oven and wait until it is cold.
Remove all accessories and removable shelf supports.
Clean the oven cavity with warm water and washing-up liquid, then dry it.
Set the function:
.
Set the temperature: 250 °C.
Duration: 1 h
When the oven is cold, clean the cavity with a wet soft cloth.
Turn off the oven and wait until
it is cold to clean it.
Remove the shelf supports.
Grab the grill corners. Pull it for‐
wards against the spring pres‐
sure and out of two holders.
The grill folds down.
Clean the oven ceiling with
warm water, a soft cloth and a
mild detergent. Let it dry.
Install the grill in the opposite
sequence.
Install the shelf supports.
Spots or discolouration of the catalytic
coating have no effect on the cleaning.
CAUTION!
Carefully handle the glass,
especially around the edges
of the front panel. The glass
can break.
Advertisement
Table of Contents
