BROSA Hemingford Accent Chair Assembly Manual

BROSA Hemingford Accent Chair Assembly Manual

Advertisement

v1.0
ASSEMBLY GUIDE
Hemingford Accent Chair

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Hemingford Accent Chair and is the answer not in the manual?

Questions and answers

Summary of Contents for BROSA Hemingford Accent Chair

  • Page 1 ASSEMBLY GUIDE Hemingford Accent Chair...
  • Page 2 Components Upon unpacking your chair from it’s delivery box, you should have two separate components (the seat and the back rest of the chair). Additional components are packed inside the seat, you will learn how to access and utilise these components in the next steps. Chair seat x 1 Chair back rest x 1 Unpacking...
  • Page 3 Align the seat to the back rest so that the Step 1 screw slots overlap. Fit a washer to a 80mm bolt and place it into one of the screw holes. Turn the bolt with the allen key until it is secure. Repeat for all ve bolts.
  • Page 4 Lift the chair o the ground and turn it right side up Step 3 while being careful not to put any pressure on the legs while you turn the chair. Place the chair on a at surface, then sit on the chair Step 4 and shift your weight around until the legs are level and the chair does not rock.

Table of Contents