Table of Contents
Advertisement
TXP-WTA_Instruction_Manual_(Rev1.3)
7 Setup Menus
7.1 Menu Structures
Sensor transmitter configuration parameters are stored in its non-volatile menu database.
To access menus, swipe the EDIT key from any data display.
The menu database displays the Main Menu with a path to Channel 1, Channel 2, Device Setup and Help Menus.
•
Channel 1 and Channel 2 have two separate but identical menu structures which determine how readings
and alarms function for each channel.
Menus contain nominal default values from the factory which may be edited by the operator to better match the
application.
Chapter 7 is dedicated to describing Channel Menus.
Device Setup contains menus not pertaining to either channel but to the unit as a whole, including:
Security
•
•
Clock/Calendar
Delays
•
•
Wireless Networking Communication
Chapter 8 is dedicated to describing Device Setup Menus.
Main Menu
7.2 Main Menu
The Main Menu screen is shown in Figure 6 1. The UP/DOWN keys maneuver the pointer while EDIT enters sub-
levels of menu items. All Main Menu items have at least one page of sub-menus indicated by the > symbol (right
hand pointing arrow) at the end of each line. Change a menu item by:
1. Swipe UP/DOWN key so that the arrow on the left is pointing to the desired menu item.
2. Swipe the EDIT key to display the cursor.
3. Swipe UP/DOWN to change that character.
4. Swipe NEXT to advance the cursor.
5. Swipe EDIT again to load the new item and remove the cursor.
6. Swipe NEXT to reverse out of the sub-menu.
The Main Menu is the pathway to Channel 1 / 2 Menus, Device Setup Menus and the Help pages.
NOTE: A channel should only be activated if it has a sensor connected to the Battery Board. The Device Setup group
contains parameters affecting the entire TXP-WTA Sensor Transmitter regardless of channel.
REV – 1.3
[34-2900-0207-4 ]
28 |
P a g e
Advertisement
Table of Contents
