Imagebuffer - Toshiba BU Series Instruction Manual

ImageBuffer

This section describes ImageBuffer control of AcquisitionControl category.
Camera stores images temporarily in image buffer, and read them out in arbitrary timing.
This function is typically used in Random Trigger Shutter mode.
Please refer to TriggerControl section as well.
Exposure
Exposure1
Image Buffer
Image Streaming
on Interface Bus
● Registers
Register
ImageBufferMode
ImageBufferFrameCount
ImageBufferRead
● Setting
- Activate trigger mode
Set "On" to "TriggerMode" register, and set "Software" or "Line0", "Line2" to "TriggerSource" register.
- Activate image buffer mode
Set "On" to "ImageBufferMode" register.
Copyright © 2016 – 2019 Toshiba Teli Corporation, All rights reserved.
Exposure2 Exposure3
Frame2
Frame1 Frame1
Image Buffer
Visibility Access
Beginner R/W Selects Image Buffer mode.
Beginner R Returns the number of frames stored in the buffer.
Beginner W Executes the image buffer read.
ImageBufferMode
OFF (*)
ON
46 / 80
Frame3
Frame2 Frame3
Frame1 Frame2
Frame1
Description
Function
Inactive
Active
http://www.toshiba-teli.co.jp/en/index.htm
Frame3
Frame2 Frame3
D4256843D
xB