Toshiba BU Series Instruction Manual page 27

Cmos camera

Hide thumbs Also See for BU Series:

Table of Contents

● In Random Trigger Shutter mode

TRIG_IN

Exposure

USB bus

* The value of T1 is the same as the value of normal shutter mode.

* T3 is typical value.

Notes of random trigger shutter mode:

- BU132M cannot accept Overlap Trigger (Trigger signal during sensor read-out). Please make sure that trigger signal

is acceptable by observing FRAME_TRIGGER_WAIT (GPIO signal) and so on.

In the period when FRAME_TRIGGER_WAIT is inactive, user must not input external trigger signal to this camera.

When the interval of the input trigger signal is extremely short, or when the trigger signal is noisy, there is a possibility

of causing the malfunction. In this case, please input a proper trigger signal.

Edge mode / Bulk mode (at all pixels readout)

T3 [μs]

15.8

26 / 80

Image

http://www.toshiba-teli.co.jp/en/index.htm

D4256843D

Table of Contents

Bu132m