General Specifications - Toshiba BU Series Instruction Manual

General Specifications

Model Name
Imager
Number of effective pixels (H) × (V)
Optical Size
Scanning area (H) × (V)[mm]
Pixel size (H) × (V)[μm]
Scan method
Electronic shutter method
Aspect ratio
Sensitivity
Minimum illuminance (*1)
Power supply
Power consumption (*2)
Interface
Transmission speed
Protocol
Image format
Number of Video out pixels (H) × (V)
Maximum Frame rate (*2)
Mono8, Mono10
Dimensions
Mass
Lens mount
Flange back
Camera body grounding:
insulation status
*1 F1.4, Gain: Maximum (+18dB), video level: 50%
*2 at the all pixel readout
Copyright © 2016 – 2019 Toshiba Teli Corporation, All rights reserved.
BU132M
CMOS image sensor
1280 x 1024
type1/1.8
6.78 × 5.43
5.3 ×5.3
Progressive
Global shutter
500lx, F5.6, ExposureTime: 16,000usec (1/62.5 sec)
DC +5V5% (from USB connector)
1.7W (maximum)
USB 3.0 (Only SuperSpeed is supported)
5Gbps (maximum)
USB3 Vision
Mono8, Mono10
1280 × 1024
29 mm(W) x 29 mm (H) x 16 mm (D) (Not including protrusion)
Approximately 32g
C-mount
17.526mm
Conductive between circuit GND and camera body
18 / 80
5 : 4
2lx
61 fps
http://www.toshiba-teli.co.jp/en/index.htm
D4256843D
xB