Specifications - Toshiba BU1207MG Manual

6.

Specifications

6.1 Electrical specification
Model Name
Optical part
Imager
Number of effective pixels
Scanning area (H) x (V) [mm]
Pixel size x
(H)
Scan method
Electronic shutter method
Aspect ratio
Sensitivity
Minimum illuminance
Gain
Setting range
AGC effective area
Black Level
Gamma
LUT
Sharpness
Image Buffer
User Setting Memory
User Free Memory
Test Pattern
Power supply
Power consumption(*1)
(*1) at the all pixel readout
Copyright © 2018 TOSHIBA TELI CORPORATION, All Rights Reserved.
(H) x (V)
(V) [μm]
BU1207MG
Optical glass
CMOS image sensor
4096 x 3000
14.19 x 10.34 (1.1 type)
3.45 x 3.45
Progressive
Global shutter
Approx. 4:3
860lx, F5.6, 1/32s
2lx (F1.4, Gain +24dB, Video Level 50%)
MANUAL、AGC (factory setting：MANUAL)
0 to +24dB (factory setting : 0dB)
Set in arbitrary percentage. (factory setting : 100% (full
screen))
-25 to 25% (factory setting : 0% [ 0LSB@8bit ])
γ=1.0 to 0.45 (factory setting : γ=1.0)
Input 12 bit, Output 12 bit
0(OFF)～7 ( factory setting : OFF)
256M Byte
15 channels
Black, White, Grey A, Grey B
Horizontal ramp waveform, Vertical ramp waveform,
Grey scale (factory setting : OFF)
DC +5V5% (from USB connector)
3.0W (maximum)
18
64 Byte
http://www.toshiba-teli.co.jp/en/
D4278997A