CDA SK900 Installation, Use And Maintenance Manual page 35

Table of Contents

Advertisement

As the colours of the wires in the mains lead for the appliance may
not correspond with the coloured markings identifying the terminals in
your spur box, proceed as follows:
1. The wire which is coloured green and yellow must be connected to
the terminal marked E (Earth) or coloured Green.
2. The wire which is coloured blue must be connected to the terminal
marked N (Neutral) or coloured Black.
3. The wire which is coloured brown must be connected to the
terminal marked L (Live) or coloured Red.
Please note:
The mains cable must only be replaced by a qualified electrician or
service engineer and must be of equivalent or better rating (i.e. 3 x
1.5 mm ² , HO5VV-F).
This appliance is intended to be connected to the mains supply with
a cable of cross sectional area 1.5 mm ² .
The current rating of the fuse or circuit breaker protecting this
appliance should be marked on the socket outlet.
Assembly and electrical connection should be carried out by
specialised personnel.
When installing this product we recommend you seek the help of
another individual.
Should the mains cable be damaged or need to be replaced, it
should only be done so by a qualified electrician or engineer. The
terminal block on the appliance is clearly marked with regards to
the positions of live, neutral and earth.
Appliance electrical rating: 2800W
35

Advertisement

Table of Contents
loading

Table of Contents