Playing Audio Via Bluetooth; Using The Speakerphone Feature/Playing Audio Via Aux-In - iHome iWBT400 Instruction Manual

Playing Audio via Bluetooth

1. Press the Power/Alarm Reset Button to turn the unit ON.
2. Press and release the Mode Button as needed until "BT" appears on the display..
3. Press the Play/Pause/Pairing Button on the unit to play audio from your linked Bluetooth
device.
pair
4. Press the or
5. Press the or
on your device, too.
6. When done listening, press the
Using the Speakerphone feature
NOTE: The unit must be powered on and linked to a Bluetooth phone to receive a call.
1. When a call is received, playing music is muted to hear the ring tone. "CALL" will
flash on the display. Adjust call volume on your device and/or on the unit as
needed.
Button to answer the call; press and release the
Press the
waiting function, press the
press the Button to switch between the calls.
2. When a call is completed, press the
Playing Audio via Aux-In
1. Connect one end of a standard stereo 3.5mm audio cable into
the aux-in jack on the back of the unit and the other end into the
headphone or output jack of your audio device.
2. Press the Power/Alarm Reset Button on the unit to turn it on.
3. Press and release the Mode Button as needed until the AUX
indicator icon and "AUX" appear on the display.
4. Place your audio device in play mode. Navigate tracks and adjust
output volume on the device.
5. Press the or
need to adjust the volume on your device as well.
6. When done listening, press the
turn the unit o .
Buttons to go to the previous or next track.
Buttons to adjust the volume on the unit. You may need to adjust the volume
Power/Alarm Reset Button to turn the unit o .
Button to place a currently active call on hold and answer a new call;
Buttons to adjust the volume on the unit. You
Power/Alarm Reset Button to
Using the
Button to end the call and resume previous function.
12
iWBT400
Button to ignore the call. For call
DC 7.5V 2.3A
Mobile Phone PC/Tablet Game Devices iPod Laptop MP3/MP4