Panasonic KX-TDA0142CE Service Manual page 20

serial port setup
check next check boxes
ASCII Sending - Sending line ends with line feeds
ASCII Receiving - Append line feeds to incoming
line ends
Warp lines that exceed terminal width
10. Supply a voltage to the TEL jack from the AC adaptor (KX-TCA1) / via power supply adaptor
(PSZZ1TDA0142)
9.1.3.2. Adjustment (RSSI) test
Description of RSSI Calibration Process
Text following "Command:" is the input command for the terminal connected to the CS.
Text following "Response:" is the terminal display response data.
Confirm the response before proceeding to the next step.If no response is set. shut off power
and repeat from the beginning.
PDF created with pdfFactory Pro trial version
20
www.pdffactory.com