1. Connect KX-TDA0142CE (Cell Station) with cable between CS and
CSINF card.
2. Connect PBX and PC with USB or Serial cable, then execute "PC
programming".
3. Press "Configuration" and "CSINF Port".
4. Confirm Cell Station Status.
INS: In Service
OUS: Out of Service
card is OK, but CS does not transmit the carrier.
Fault: Fault
9. TEST AND ADJUSTMENT
9.1. TEST AND ADJUSTMENT FOR RF PART
Note:
About the software version
Update the software to the latest version before performing the RF test.
9.1.1. Required Equipments
1. CMD60
2. (PC) Personal Computer with serial port (Windows2000/98 or
previous version with communication software)
3. Power Supply Adaptor (PSZZ1TDA0142)
4. Service JIG cable (PSZZ2TDA0142)
5. AC adaptor (KX-TCA1) or Battery Box (PSZZTD142CE)
PDF created with pdfFactory Pro trial version
CS is normal
Communication data between CS and CSIF
CS is not active.
15
www.pdffactory.com