H.264, 10800p super min vandal proof dome camera (74 pages)
Summary of Contents for AVer TR313V2
Page 1
AI Auto Tracking PTZ Camera TR313V2 / TR333V2 User Manual...
Page 2
Federal Communications Commission Statement NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
Page 4
WARNING ◼ To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. Warranty will be void if any unauthorized modifications are done to the product. ◼ Do not drop the camera or subject it to physical shock. ◼...
Contents Package Contents................. 9 Package Contents ................9 Optional Accessories ................ 9 Product Introduction ................. 10 Overview ..................10 LED Indicator .................. 10 Pan and Tilt Angle ................11 Dimension ..................11 Device Connection ................. 12 PoE Connection ................12 RS232 and RS422 Connection ............
Page 6
Network ................. 28 Advanced Setting ............. 28 System ................... 29 Web Setup..................30 Using the AVer IPCam Utility to Find the Camera ....................... 30 Using AVer PTZ Management Software to Find the Camera ................31 Make a Connection to the Camera via Browser ....................
Page 7
Focus ..................35 Manual Pan-Tilt-Zoom Speed Adjustment ... 35 Preset Setting ..............36 Tracking Control ............... 36 Camera Settings ..............38 Exposure ................38 Image Process ..............39 Video & Audio ................ 40 Get 4K (2160p) Output ..........41 Network ..................42 DHCP ..................
Package Contents Package Contents Ceiling Mount Camera Unit Drilling Paper Quick Start Guide Bracket (x2) M2 x 4mm Power Adapter & 1/4”-20 L=6.5mm Cable Fixing Plate Screw (x3) Power Cord Screw (x2) M3 x 6mm DIN8 to D-Sub9 RS232 In/Out Remote Control Screw (x3) Cable...
Product Introduction Overview (5) (6) (7) (8)(9) (11) (10) (12) (1) Tally Lamp (5) PoE+ IEEE 802.3AT (9) Audio In* (2) IR Sensor (6) RS232 Port (10) HDMI Port (3) LED Indicator (7) RS422 Port (11) 3G-SDI** (4) Kensington Lock (8) USB 3.0 Port (Type B) (12) DC Power Jack *Line input level: 1Vrms (max.).
Device Connection Joystick (Camera Control) Laptop (Management/Presentation/ Video Conference) Microphone Audio Input RS232, RS422 or IP 3G-SDI Monitor/TV PoE+ (Display) HDMI Lecture Capture System Camera (Record) Web Application (Remote Management) PoE Connection Connect the camera to the router or switch through the PoE+ port. [Note] Only support IEEE 802.3AT PoE+ standard.
RS232 and RS422 Connection Connect through the RS232 or RS422 for camera control. ◼ RS232...
Page 14
● RS232 Port Pin Definition Mini DIN9 Function I/O Type Signal Description PIN # Data Terminal Ready Output Data Set Ready Input VISCA IN Transmit Data Output Receiver Data Input Data Terminal Ready Output Data Set Ready Input Transmit Data VISCA OUT Output Receiver Data...
Page 15
● RS232 mini DIN9 to mini DIN8 Cable Pin Definition Mini DIN8 Cable Pin Definition Signal...
Video Output Connection ◼ HDMI Use the HDMI cable to connect with monitor or TV for video output. HDMI Cable Monitor/TV ◼ 3G-SDI Connect to 3G-SDI monitor for video output. 3G-SDI Cable (Not Included) SDI Monitor [Notes] ◼ HDMI and 3G-SDI monitors can be connected to camera and output live video simultaneously; Assuming HDMI monitor is well connected before the camera turned on, the OSD menu will be displayed on HDMI monitor in default.
Page 20
Cable Fixing Plate Installation Secure the cable fixing plate to the camera with 3 M2 x 4mm screws (included in the package). Use 4 cable ties to secure the cables and Plug in cables. cable fixing plate.
Page 21
Ceiling Mount Installation 1. Secure the mount bracket on the ceiling. 2. Install the mount bracket on the camera. Screw: 4 screws, M4 x 10mm (Not Screw: 2 screws, 1/4"-20 L=6.5mm Included in the package) (Included in the package) 3. Slide the mount bracket with the camera 4.
Camera Installation ◼ Angle A: less than 45˚ ◼ Height B: 2~3m from floor ◼ Distance C: longer than 3m away from podium ◼ Position: center of classroom ◼ Distance between the camera and tracking target (presenter): Optical zoom ratio ability Upper body size Full body size 3~16m...
Remote Control Name Function Turn the unit on/standby. (1) Power Open and exit the OSD menu. (2) Menu CAM1 to CAM3 button (3) Camera Select Select a camera to operate. ◼ Use for setting the preset position 0~9. (4) Numeric Pad ◼...
Page 24
Name Function Zoom in/out slowly. (13) Zoom +/- Enable manual focus. Use Far/Near to adjust the focus. (14) MF/Far/Near Zoom in/out fast. (15) Zoom Fast +/- Pan-Tilt speed adjustment. (16) Pan-tilt Fast/Slow Auto focus. (17) AF Auto Tracking on/off. (18) Auto Tracking Freeze the live image.
Set Up the Camera OSD Menu Press button on the remote control to call out the OSD menu and use ▲ , ▼ , , and button to operate the OSD menu. Set Up IP Address of the Camera Static IP 1.
DHCP 1. Press button on the remote control to call out OSD menu. 2. Go to Network > DHCP > On. 3. After turning the DHCP on, the user can go to System > Information to view IP address.
OSD Tree Camera Set up camera parameters – Exposure Mode, White Balance, Pan Tilt Zoom, Noise Reduction, Saturation, Contrast, Sharpness, Mirror, and Flip. Camera Exposure Mode Full Auto Exposure Value/Gain Limit Level/Slow Shutter Shutter Priority Exposure Value/Shutter Speed/Gain Limit Level Iris Priority Exposure Value/Iris Level/Gain Limit Level/Slow Shutter Manual...
Video Output Select video resolution (2160p is supported on TR313V2 and TR331V2 only). Priority Mode 2160p/1080p Frequency 50 Hz/59.94 Hz/60 Hz Resolution 2160P/30 2160P/29.97 1080P/60 1080P/59.94 1080P/30 1080P/29 1080I/60 1080I/59 720P/60 720P/59.94 2160P/25 1080P/50 1080P/25 1080I/50 720P/50 Network Set up IP mode – DHCP or static IP.
System ◼ Status OSD: Enable/disable Preset status (Save Preset, Call Preset, Cancel Preset) display on the screen. ◼ Camera Selector: Set the camera ID 1~3 for using remote control on multiple cameras control (also see (3) Camera Select in Remote Control section). ◼...
Web Setup Connect the camera from a remote site through the internet. Using the AVer IPCam Utility to Find the Camera To find the IP address of your cameras, you can execute the IPCam Utility installer. Follow below steps to find the IP address of the camera.
Page 31
Using AVer PTZ Management Software to Find the Camera To find the IP address of your cameras, you can download then install AVer PTZ Management Software. Follow below steps to find the IP address of the camera. 1. Download the AVer PTZ Management software from https://www.aver.com/download-center...
Find the IP address of the camera. Call out OSD menu and select System > Information. Or use AVer IPCam utility to find the IP address of the camera. 2. Open the browser and enter the IP address of the camera. The PC/laptop is required an internet...
Page 33
After connecting to the camera, enter the user account and password (default is admin/admin) to log in Web.
Live View In live view page, the user can set up camera control (camera direction control, zoom in/out, focus, pan/tilt/zoom speed), preset setting, and tracking control (on, off, tracking mode, click track).
Pan-Tilt-Zoom Control In Camera Control tab, use , and to adjust the camera view position and use to zoom. Select to go back to default position. Digital Zoom: Enable/disable digital zoom function. Move the scroll to adjust the limit of digital zoom. Focus Switch to auto (AF) or manual (MF) focus.
Preset Setting Set up preset position and view preset position. 1. Select the Preset tab in live view page. 2. Use , and to adjust camera view position and use to zoom. 3. Enter preset position number (0~255) in Save Preset column and select Save to save the position.
Page 37
◼ Click Track function: allows user to change tracking object while auto tracking. Select Click Track button. A red frame is targeted on the tracking object and a blue frame is targeted on another object on the live screen. Click the object. When frame changes to red, the tracking object is changed to the selected one.
Image Process Select the Image Process tab in Camera Settings page. Set up the White Balance, Saturation, Contrast, Sharpness, Noise Filter, Mirror, and Flip.
Video & Audio In Video & Audio page, user can setup the following functions: ◼ Priority Mode: 2160p or 1080p. ◼ Power Frequency: 50Hz, 59.94Hz, or 60Hz. ◼ Video Mode: Stream Only, USB Only, or USB + Streaming. The frame rate is up to 60fps if Stream Only or USB Only is selected.
Get 4K (2160p) Output Make sure that your HDMI monitor and cable support 4K (HDMI 2.0 or above). Select 2160p for Priority Mode via either web or OSD menu. Select 2160p/30 resolution at OSD menu to get 4K HDMI output. (3G-SDI does not support 4K.) Select “USB Only”...
Network Hostname: To change the display of Hostname, allow to name the camera in other device e.g. IP Router. The default Hostname of camera is AVer. DHCP Set up IP address of camera – DHCP or static IP, Netmask, Gateway, and DNS. After setting, select...
RTMP Settings Set up for uploading the camera’s live view to the broadcasting platform (e.g. YouTube). Refer to the instruction of broadcasting to get the RTMP server URL and stream key from the broadcasting platform and enter in Server URL and Stream Key columns. Select Start Stream to begin uploading the live video of the camera to the broadcasting platform.
Page 44
Example 1 vMix: Set the workstation and the TR300V2 camera in the same network. Check the workstation’s IP address (Destination IP). Example: Select SRT (Listener) from Stream Type in vMix Input Select window. Enter the information into the SRT Settings TR300V2 web interface, then click on “Start Stream”, Connect Status shows “Connected”.
Page 45
Example2 OBS (Open Broadcaster Software): Set the workstation and the TR300V2 camera in the same network. Check the workstation’s IP address (Destination IP). Example: Open OBS, add a scene, add a source, enter srt://Work Station IP:port?mode=listener Example: srt://10.100.105.127:8889?mode=listener [Note] If there is no image, please try right click on the source->Transform->Fit to screen to re-scale image.
Tracking Settings Set up Tracking mode – Presenter, Zone, and Hybrid mode. Presenter Mode Camera will start tracking when object enters the tracking point (preset point). to adjust the camera to tracking point (preset position). Then, select Save to Preset 1 to save the tracking point. Tracking Sensitivity: Set the sensitive level of tracking.
Page 47
Tracking Point: When losing tracking target and going back to Tracking Point. Time of Return to Tracking Point: Set the idle time for camera return to tracking point. Move bar to set the value. The current value is displayed at upper right corner. People Size: Select the people in full or half size while tracking.
[Note] Quick Set up for Presenter Mode Use IR remote to adjust the camera view properly then save to preset1 as the initial position. Press tracking “On” button on IR remote, here you go! Press “UPPER BODY” key to get closer view (up to 60% body), or FULL BODY to see entire presenter in the view.
Page 49
[Note] Set each preset overlapping the next preset view (one man width overlap), no or less zoom between presets. Examples below: [Note] Set the preset view to clearly see the preseter at least complete half body (60% upper body) to ensure tracking accuracy, make sure there is no any other human-outline poster/TV/moniter in the background.
3. Tracking Sensitivity: Set the sensitive level of tracking. Move bar to set the value. The current value is displayed at upper right corner. 4. Time of Return to Tracking Point: Set the idle time for camera return to tracking point. Move bar to set the value.
Page 52
Tracking Sensitivity: Set the sensitive level of tracking. Move bar to set the value. The current value is displayed at upper right corner. Tracking Point: When losing tracking target and going back to Tracking Point. Time of Return to Tracking Point: Set the idle time for camera returning to tracking point. Move bar to set the value (in seconds).
Page 53
[Note] The position of the red solid frame corresponds to the central position of the presenter. The black dotted frames represent the tracking areas for different positions of the presenter. Therefore, the red dotted frame is the actual effective tracking area of the red solid frame. Auto Zoom: When Auto Zoom is off, camera stops zooming in/out automatically but keep the size of Preset 1.
Version. ◼ Upgrade firmware: Follow below steps to upgrade the firmware. Download the newest firmware from https://www.aver.com/download-center/ Connect to the camera through the browser. Select System > Upgrade firmware > Choose File. Select the firmware and select the Upgrade button.
CGI Command CGI List for Video Transmission CGI item name Command Parameter Name Parameter value Description Get JPEG /snapshot 1280x720 jpg Get RTSP stream rtsp://ip/live_st1 CGI List for Camera Control CGI item name Command Parameter Name Parameter value Description up start /cgi-bin?SetPtzf= 1,0,1&(random) up end...
Page 59
Camera Preset Speed Pan : 200° / sec, Tilt : 200° / sec Preset Positions 10 (IR), 255 (RS-232) Camera Control - Interface RS-232 (DIN8), RS-422 (RJ45), IP Camera Control - Protocols VISCA / PELCO-D (RS-232 / RS-422 / IP), CGI (IP) Image Processing Noise Reduction (2D / 3D), Flip, Mirror Power Frequency...
Page 60
Operating Conditions Temperature : 0 °C to +40 °C ; Humidity : 20% to 80% Storage Conditions Temperature : -20°C to +60°C ; Humidity: 20% to 95% IP Streaming Resolution 4K 30fps Network Video Compress Formats H.264, H.265, MJPEG Maximum Frame Rate 4K 30fps or 1080p 60fps Bit-rate Control Modes VBR, CBR (selectable)
Page 61
Web UI Live Video Preview Camera PTZ Control Pan, Tilt, Zoom, Focus, Preset Control Camera / Image Adjustment Exposure, White Balance, Picture Network Configuration DHCP, IP Address, Gateway, Subnet Mask, DNS Software Tools Device IP Searching, Configuration Tool Support Windows® 7 or later Warranty Camera 3 Years...
TR333V2 Camera 1/2.8” 4K Exmor CMOS Image Sensor Effective Picture Elements 8 Megapixels Auto 4K/30, 4K/29.97, 4K/25, 1080p/60, 1080p/59.94, Output Resolutions 1080p/50, 1080p/30, 1080p/29.97, 1080p/25, 720p/60, 720p/59.94, 720p/50, 720p/30, 720p/29.97, 720p/25 Minimum Illumination 0.5 lux (IRE50, F1.6, 30fps) ≥ 50 dB S/N Ratio Gain Auto, Manual...
Page 63
Camera Preset Speed Pan : 200° / sec, Tilt : 200° / sec Preset Positions 10 (IR), 255 (RS-232) Camera Control - Interface RS-232 (DIN8), RS-422 (RJ45), IP Camera Control - Protocols VISCA / PELCO-D (RS-232 / RS-422 / IP), CGI (IP) Image Processing Noise Reduction (2D / 3D), Flip, Mirror Power Frequency...
Page 64
General Remote Control Infrared Operating Conditions Temperature : 0 °C to +40 °C ; Humidity : 20% to 80% Storage Conditions Temperature : -20°C to +60°C ; Humidity: 20% to 95% IP Streaming Resolution 4K 30fps Network Video Compress Formats H.264, H.265, MJPEG Maximum Frame Rate 4K 30fps or 1080p 60fps...
Page 65
Web UI Live Video Preview Camera PTZ Control Pan, Tilt, Zoom, Focus, Preset Control Camera / Image Adjustment Exposure, White Balance, Picture Network Configuration DHCP, IP Address, Gateway, Subnet Mask, DNS Software Tools Device IP Searching, Configuration Tool Support Windows® 7 or later Warranty Camera 3 Years...