Advertisement
Description
•LED Indicator:
The LEDs provides instant status feedback, and helps monitor and troubleshoot when required.
Power LED
LINK/ACT
PoE
Standard
Protocol
Data Transfer Rate
Network Cables
Number of Ports
PoE power on RJ-45
AC to DC power adaptor
Power Consumption
Operating Temperature
Humidity
Dimensions
EMI
Safety
RAM buffer
Filtering Address Table
Packet
MAC address Learning
LED on: Power ON / LED off: Power off.
LED on: this port is Link and Active
LED off: this port is not correct Link or inactive
LED on: The PoE power device (PD) is connected and the port is
supplying power successfully
LED off: no PoE power device (PD) connected
IEEE 802.3 10BASE-T Ethernet
IEEE 802.3u 100BASE-TX Fast Ethernet
IEEE 802.3x Full Duplex Flow Control
IEEE 802.3 af Power over Ethernet
CSMA/CD
Ethernet: 10Mbps (half-duplex), 20Mbps (full-duplex)
Fast Ethernet: 100Mbps (half-duplex), 200Mbps (full-duplex)
10BASE-T: 2-pair UTP Cat 3, 4, 5 up to 100 meters.
100BASE-Tx: 2-pair UTP Cat 5, 5e up to 100 meters.
16 x 10/100Mbps auto-MDIX RJ-45ports, 8 PoE-enabled ports.
Power +: ping 3 & ping 6: Power –" ping 1 & ping 2
Input: 100V ~ 240VAC, 50Hz ~ 60Hz.
Output: 48VDC/1.5A af
6.4 watts (max with no PD device connected)
123.2watts (8 PoE ports af)
33℉ ~ 104 ℉
Storage Temperature: -10℃ ~ 70 ℃ or 14℉ ~ 158 ℉
Relative Humidity: 5% - 95%
190mm W x 139mm D x 43.2mm H
FCC Class B, CE Mark Class B
100VAC to 240VAC power adaptor UL listed.
64K bytes per device
1K entries per device
10Mbps Ethernet: 14,880/pps
Automatic update
5
Advertisement
