Advertisement
Quick Links
ST-POEAF-8/16-RM
16 port switch with 8 PoE ports
User Guide
IMPORTANT
This user's guide contains information on the limitations regarding product use and function
and information on the limitations as to liability of the manufacturer. Read the entire guide
carefully
1
Advertisement
Related Manuals for Security Tronix ST-POEAF-8-RM
Summary of Contents for Security Tronix ST-POEAF-8-RM
- Page 1 ST-POEAF-8/16-RM 16 port switch with 8 PoE ports User Guide IMPORTANT This user’s guide contains information on the limitations regarding product use and function and information on the limitations as to liability of the manufacturer. Read the entire guide carefully...
- Page 2 •FCC Warning: This device has been tested and found to comply with the regulations for Class B digital equipment, pursuant to Part 15 of FCC Rules. These limits are designed to against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with users guide, may cause harmful interference to radio communications.
-
Page 3: Power Over Ethernet (Poe) & Features
Power over Ethernet (PoE) & Features •Power Over Ethernet (PoE): Power over Ethernet (PoE) integrates 48VDC power and data onto one single cable, eliminating the need to have AC power available at all equipment locations. Power and Data are integrated onto the same cable, supporting category 5/5e up to 100 Meters. PoE provides power to PoE compatible devices, such as VOIP telephones, wireless LAN access points, and IP security cameras. -
Page 4: Connecting Network Cables
Connecting Network Cables •Connecting Network Cables The ST-POEAF-8/16-RM has 16 10/100Mbps Ethernet ports, with 8 PoE-enabled ports. Each port incorporates 10/100Mbps support via UTP Cat5/5e cables. The 8 PoE ports will automatically activate when a compatible device is identified. Legacy devices that are not compatible will not be supplied power. This feature allows users to freely and safely mix legacy and Power over Ethernet compatible devices on a single network. - Page 5 Description •LED Indicator: The LEDs provides instant status feedback, and helps monitor and troubleshoot when required. Power LED LED on: Power ON / LED off: Power off. LINK/ACT LED on: this port is Link and Active LED off: this port is not correct Link or inactive LED on: The PoE power device (PD) is connected and the port is supplying power successfully LED off: no PoE power device (PD) connected...
- Page 6 For additional support, please contact SecurityTronix Technical Support: support@securitytronix.com (800) 688-9282 Press “3” for Tech Support, then “2” for CCTV Tech Support.