Related Manuals for Security Tronix ST-POE-S16-200W
Summary of Contents for Security Tronix ST-POE-S16-200W
- Page 1 INSTALLATION MANUAL© ST-POE-S16-200W 16-Port 10/100 Ethernet PoE Switch Copyright North American Cable Equipment, Inc. v1.0 10/14/10...
-
Page 2: Package Contents
One installation manual PRODUCT DESCRIPTION The ST-POE-S16-200W is a 16-port 10/100Mbps Ethernet switch combined a with a standard 802.3af 16-port PoE capability. The unit incorporates an external 48VDC power supply. Each of the PoE Ethernet ports can provide 15.4 watts of power as well as 10/100Mbps data transmission over as CAT 5/ 5e /6 cables. -
Page 3: Specifications
SPECIFICATIONS ST-POE-S16-200W Specifications (Typical) IEEE 802.3 10Base-T Ethernet IEEE 802.3u 100Base-TX Fast Ethernet 1. Standard IEEE 802.3x Full Duplex Flow Control IEEE 802.3af Power over Ethernet 2. Protocol CSMA/CD Ethernet: 10Mbps (half-duplex), 20Mbps (full-duplex) 3. Data Transfer Rate Fast Ethernet: 100Mbps (half-duplex), 200Mbps (full-duplex) 10BASE-T: 2-pair UTP CAT 3, 4, 5 up to 328 feet 4. -
Page 4: Hardware Connections
3. HARDWARE CONNECTIONS The unit should be installed within 5 feet of the AC power outlet and on a surface capable of supporting the device’s 13.2 lbs weight. Objects are not to be placed on the device and there must be sufficient space and ventilation for proper heat dissipation. Front Panel Description Ports Ports 1X through 16X –... - Page 5 Rear Panel Description Desktop Installation If installing the ST-POE-S16-200W on a desktop or shelf place the included rubber feet on the bottom of the unit (one per corner) to provide cushioning and reduce the possibility of scratching furniture. 19” Rack Installation Fasten the two included mounting brackets to the ST-POE-S16-200W using the screws provided.
- Page 6 Connect the AC power cord to the unit and then to an appropriately rated AC power outlet. Move the unit’s power switch to the “On” position. b. As required connect a CAT5/5e or CAT 6 network cable from the network device to any of the ST-POE-S16-200W’s available RJ-45 ports. v1.0 10/14/10...
-
Page 7: Troubleshooting
100Mbps LED remains off the computer’s connection speed is 10Mbps. c. If unable to share files once the computer is connected to the ST-POE-S16-200W (i) check to see if the Link/ACT LED is on; (ii) measure the network cable to ensure the minimum and maximum lengths are respectively 5 feet and 328 feet;...