Table of Contents
Advertisement
•
Do not perform maintenance or cleaning of the oven
without first switching off the electricity supply. If the oven
has recently been used, allow to cool.
•
Do not place hot enamel parts in water. Leave them to
cool first.
•
Do not allow vinegar, coffee, milk, saltwater, lemon or
tomato juice to remain in contact with enamel parts.
•
Do not use abrasive cleaners or powders that will scratch
the surface of the enamel.
•
Do not attempt to repair the internal workings of your
oven.
•
The oven is equipped with a safety thermostat which will
switch off the oven in the event of the oven overheating.
If the safety thermostat should switch off the power, you
must wait for the oven to cool down before using it again.
•
Do not cover the oven floor with aluminium foil.
First use of the oven
The metal casing of this appliance has been coated with a
preservative to protect it during transport and storage. This should be
removed during installation by using a non-abrasive stainless steel
cleaner. Always follow the instructions given with the cleaner being
used.
Before using the oven for the first time we recommend that you clean
both oven cavities with soapy water, rinse carefully and then heat
on each of the below programmes at maximum temperature for the
specified time. A slightly unpleasant smell may be produced, caused
by grease remaining on the oven elements from the production
process.
6
Advertisement
Table of Contents
