Alarm Clock - Philips VoiceTracer DVT4010 User Manual

Tip
• Press the j key to cancel the operation without saving and return
to the stop mode.

9.3.5 Alarm clock

You can use the device as an alarm clock or an appointment reminder.
The alarm goes off or a selected file is played at a pre-set time.
1
In stop mode (start-up screen), press MENU.
2
Press h / b to select the device settings menu ×.
3
Press + / – to select the
Alarm
4
Press the record key, g, to confirm.
5
Press + / – to select the
Set time
6
Set date and time as described
time, page 48).
7
Press the record key, g, to confirm.
8
Press + / – to select the
Set source
signal.
9
Press + / – to select between an alarm signal, selected recording, or
a set radio station to be played as an alarm sound.
50
Settings
function.
function to set the alarm clock.
(see also chapter 9.3.1 Set date &
function to set the alarm clock
10
Press the record key, g, to confirm.
If this feature is on, the ¿ icon will be displayed.
X
11
Press + / – to select the
Off
Tip
• Press the j key to cancel the operation without saving and return
to the stop mode.
9.3.6 Enabling/disabling key and signal tones
1
In stop mode (start-up screen), press MENU.
2
Press h / b to select the device settings menu ×.
3
Press + / – to select the
Device sounds
4
Press the record key, g, to confirm.
5
Press + / – to enable/disable the key and signal tones.
6
Press the record key, g, to confirm.
7
Press the j key to exit the menu.
Tip
• Press the j key to cancel the operation without saving and return
to the stop mode.
function to turn off the alarm-clock.
function.
Table of contents