Philips VoiceTracer DVT4010 User Manual page 27

5.1.2 Add index marks
Index marks can be used to mark certain points in a recording as
points of reference. Press h / b to select index marks
chapter 6.2 Play back a recording or music file, page
1
Press the INDEX/a key during recording to add an index mark.
The index number is displayed for one second. Up to 32 index
X
marks can be set per file.
Tip
• You can also add index marks while the recording is paused.
5.1.3 Recording using the Zoom function (DVT6010 –
DVT8010)
Use the zoom function to focus on the front microphone and filter
sounds from the side. This allows you to record a lecture or a speech
over a long distance (see also chapter 9.1.4 Set microphone sensitivity,
page 39).
Table of contents
5.1.4 Using the pre-recording function
The pre-recording function allows to record the last five seconds
(see also before you press the record key. The device switches into a standby
30). mode and records a five-second loop without saving it. Press the
record key to save the five-second loop. This feature allows you to
spontaneously record important parts of a conversation.
1
Switch on the pre-recording function
Enabling/disabling the pre-recording function, page
2
Press the g key.
X
second loop without saving it.
3
Press the g key.
X
The device switches into a standby mode and records a five-
The unit starts recording and saves the five-second loop.
(see also chapter 9.1.9
42).
27
Record