Philips VoiceTracer DVT4010 User Manual page 43

9.1.10 Setting the timer
You can use this function to start a recording at a specified date and
time. The device can record from the device's microphone, the radio
or an external sound source.
1
In stop mode (start-up screen), press MENU.
2
Press the h / b key to select the record settings menu Ó.
3
Press + / – to select the
Timer
4
Press the record key, g, to confirm.
5
Press + / –/ b to select the function
time at which recording starts.
6
Set the date and time for the start of recording as described in
also chapter 9.3.1 Set date & time, page
7
Press the record key, g, to confirm.
8
Set the date and time for the end of recording as described in
also chapter 9.3.1 Set date & time, page
9
Press the record key, g, to confirm.
10
Press h / b to select the desired folder for the recording.
11
Press the record key, g, to confirm.
Table of contents
function.
, in order to set the
Set time
48).
48).
If this feature is on, the À icon is displayed. The device will
X
start recording at a specified time.
12
Press + / – to select the
source.
13
Press the record key, g, to confirm.
14
Press + / – to select if the recording should be made from a
microphone, an external source, or a radio station. Select the pre-
set station before you record from the FM radio.
15
Press the record key, g, to confirm.
16
Press + / – to select the
Tip
(see
• Press the j key to cancel the operation without saving and return
to the stop mode.
9.1.11 Enabling/disabling voice-activated recording
(see
If voice-activated recording is enabled, recording session will start
when you begin speaking. When you stop speaking, the device will
automatically pause recording after three seconds of silence, and
resume only when you begin speaking again.
Use the voice activation level to set the volume at which the device
should begin recording.
function to set the sound
Record source
function to turn off the timer.
Off
43
Settings