Initial Installation Process - Philips VoiceTracer DVT4010 User Manual

Note
• The device switches itself off automatically if no key is pressed
within a pre-set period of time
OFF, page 49).

4.3 Initial installation process

The initial installation process starts when first using the device or
possibly if there has been a long interruption to the power supply. The
date and time entered are saved with each recording as the recording
time.
4.3.1 Select language
1
Use the + / – keys to select the display language you want.
2
Press the record key, g, to confirm.
Note
• Your language might not be available. Select an alternative one.
4.3.2 Set date & time
1
Press + / – to set the year.
2
Press b
.
16
First steps
(see also chapter 9.3.4 AUTO-
3
Press + / – to set the month.
4
Press b
.
5
Press + / – to set the day.
6
Press b
.
7
Press + / – to switch between the 12/24-hour system.
8
Press b
.
9
Press + / – to set the hours.
10
Press b
.
11
Press + / – to set the minutes.
12
Press the record key, g, to confirm.
Tip
• You can change the language, date and time at any time using the
settings menu (see also chapter 9.2.1 Select language, page 46)
(see also chapter 9.3.1 Set date & time, page 48).
Table of contents