Alarm Clock; Enabling/Disabling Key And Signal Tones - Philips Voice tracer DVT2500 User Manual

8.3.4 Alarm clock
You can use the device as an alarm clock or an appointment reminder.
The alarm goes off or a selected file is played at a pre-set time.
1
In stop mode (start-up screen), press a/MENU for at least two
seconds.
2
Press a to select the device settings menu ×.
3
Press h / b to select the function
4
Press the record key, g, to confirm.
5
Press h / b to select the
time.
6
Set date and time as described
time, page 34).
7
Press the record key, g, to confirm.
8
Press h / b to select the
signal.
9
Press h / b to select between an alarm signal or a selected
recording of your choice to be played as an alarm sound.
10
Press the record key, g, to confirm.
If this feature is on, the ¿ icon will be displayed.
X
36
Settings
.
Alarm
function, to set the alarm
Set time
(see also chapter 8.3.1 Set date &
function, to set the alarm
Set source
11
Press h / b to select the
Tip
• Press the ~ key to cancel the operation without saving and return
to stop mode.
8.3.5 Enabling/disabling key and signal tones
1
In stop mode (start-up screen), press a/MENU for at least two
seconds.
2
Press a to select the device settings menu ×.
3
Press h / b to select the function
4
Press the record key, g, to confirm.
5
Press h / b, to enable/disable the key and signal tones.
6
Press the record key, g, to confirm.
7
Press the ~ key to exit the menu.
Tip
• Press the ~ key to cancel the operation without saving and return
to stop mode.
function, to turn off the alarm.
Off
.
Device sounds
Table of contents